Magic Mesh Door Cover Curtain

Getting Started:

l  Before handling , ensure that the surface is clean of dirt and debris

l  Determine the proper direction to install the curtain:

-          If your door opens IN , install on the OUTSIDE of the door frame .

-          If your door opens OUT , install on the INSIDE of the door frame

-          For sliding doors , attached the curtain to the outside of the door frame and the stationery door .

-          Find and mark the center of the top of your door frame .

Hanging Instructions

1. Lay you Magnet Door Curtain flat on the floor with magnets aligned in the center .Note that the top panel will have a large gap between the magnets and the trim versus the bottom panel .
2. Check each magnet to ensure they attract to each other symmetricaly .
3. Peel off the adhesive tape (one side ) and apply to the Magnet Door Curtain according to the diagram.
4. Take Panel A and peel off adhesive tape #1(the other side) and apply to center of door frame with pressure . Be sure to hang the curtain high enough so that it does not drag on the ground .Repeat for adhesive tape #2 .
5. Take Panel B and peel off adhesive tape #6(the other side) and apply to OPPOSITE center of door frame with pressure .Be sure to hang the curtain high enough so that it does not drag on the ground . Repeat for adhesive tape #7 .
6. Ensure the magnets are properly aligned and connected in the center .
7. Attach rest adhesive tapes #3--#5 and #8--#10 .
8. Fix the decorative head lace on top of the door curtain if you need .

Helpful Tips : 

l       For plastic frames , only use the hook and loop strips . 

l       For wooden frames , you can also use the wood tacks provided .

l       Please note the wood tacks leave puncture holes .

l       If magnets do not snap together , adjust the width positioning of the mesh .

 Cleaning and Storage

l       Do not use any harsh or abrasive cleaners on this product .

l       Wipe off the mesh with a damp , lukewarm cloth . For stubborn dirt , you can spot clean with a small amount of soap and a cloth . Allow the mesh to air-dry .

l       Do not put in dryer . Do not dry clean .